B-155
Covered Hopper Rake Barge
200’ X 35’ X 14’ w/5’ COAMING
Drawing: Top View
Drawing: Profile View
B-155
FLYER
PDF contains this information plus draft tables. For questions regarding any barge listed - please contact Andrew Holthaus or Paul Peoples.
B-155
Specifications
Description
- 200’ X 35’ X 14’
- 5’-0” Coaming
- Fiberglass lift-off covers
- 16’-6” Headlog Height
- Two (2) 26” wide x 36” deep Towknees
- Cargo Capacity 87,305 Cu. Ft.
- Barge Weight 321.5 Short Tons
Voids
- Rake
- Stern
- 5 Mid-Body
- Upper and Lower Intermediate Rub Bars 6” x 3/4″
Deck Fittings
- 10” Double Bitt (4)
- 36” Cast Steel Kevels (8)
- ”D”-Rings (4)
- 15” x 23” 2-Dog R.W.T. Hatch (12)
- Cover Ladder
Scantlings
- ¾” stern corners, stern log, bow head log, and bow corner wraps
- 1/2” Innerbottom
- 3/8” Lower Slope Sheet – 5/16” Upper Slope Sheet
- 3/8” Lower Cargo Wall – 5/16” Upper Cargo Wall
- 3/8” Gunwale
- 3/8” Sides, Rake and Stern Decks
- 5/16” Coaming
- 5/8” Bilge Knuckle
- 3/8” Mid-Body Bottom
- 3/8” Rake Bottom
- 5/8” Stern Bottom
Coatings
- All Steel (Plate and Structural) Wheelabrated SSPC-SP-10
- Pre-Construction Zinc Primer 0.50 to 0.75 MILS
- Stripe Coat bottom welds in Mid-Body and Stern
- Interior Voids – Lower 24” with Void Coat at 4.0 to 6.0MILS – SeaGuard 1050 standard
- Exterior – 1 coat Epoxy 6.0 to 8.0 MILS – SeaGuard 6000 Haze Gray standard – bottom paint optional
- Non-skid on walking decks and hatch lids – Black Beauty standard
- Cargo Area – None
- 6” Safety Stripe around perimeter painted yellow – standard
- Manhole and Deck Fittings painted white – standard
- Barge Name – 6 places – cut from plate steel and painted white
