B-36
Covered Hopper Rake Barge
200’ X 35’ X 13’ w/4’ COAMING
Drawing: Top View

Drawing: Profile View

B-36
FLYER
PDF contains this information plus draft tables. For questions regarding any barge listed - please contact Andrew Holthaus or Paul Peoples.
B-36
Specifications
Description
- 200’ X 35’ X 13’
- 4’-0” Coaming
- Fiberglass lift-off covers
- 15’-0” Headlog Height
- Two (2) 26” wide x 36” deep Towknees
- Cargo Capacity 77,162 Cu. Ft.
- Barge Weight 330.50 Short Tons
- Upper and Lower Rub Bars 6” x 3/4″
Voids
- Rake
- Stern
- 5 Mid-Body
Deck Fittings
- 10” Double Bitt (4)
- 36” Cast Steel Kevels (8)
- ”D”-Rings (4)
- 15” x 23” 2-Dog R.W.T. Hatch (12)
- Ladders on Bow and Stern
- No winches
Scantlings
- ¾” stern corners, stern log, bow head log, and bow corner wraps
- 1/2” Innerbottom
- 3/8” Slope Sheet
- 3/8” Cargo Wall
- 3/8” Gunwale
- 3/8” Sides
- 5/8” Bilge Knuckle
- 3/8” Mid-Body Bottom
- 3/8” Rake Bottom
- 5/8” Stern Bottom
- 6” x 6” x ½” Boundry Angle
Coatings
- All Steel (Plate and Structural) Wheelabrated SSPC-SP-10
- Pre-Construction Zinc Primer 0.50 to 0.75 MILS
- Stripe Coat bottom welds in Mid-Body and Stern
- Interior Voids – Lower 24” with Void Coat at 5.0 MILS – SeaGuard 1050 standard
- Exterior – 1 coat Epoxy 6.0 to 8.0 MILS – SeaGuard 6000 Haze Gray standard
- Non-skid on walking decks and hatch lids 95 – Black Beauty standard
- Cargo Area – None
- 6” Safety Stripe around perimeter painted yellow – standard
- Manhole and Deck Fittings painted white – standard
- Barge Name – 6 places – cut from plate steel