DB-157
Deck Barge - 2500 PSF Deck Capacity
200’ X 35’ X 10’-6” w/3’ COAMING
Drawing: Top View
Drawing: Profile View
DB-157
FLYER
PDF contains this information plus draft tables. For questions regarding any barge listed - please contact Andrew Holthaus or Paul Peoples.
DB-157
Specifications
Description
- 200’ X 35’ X 10’-6”
- 3’-0” Coaming (Located either Port, Starboard or Both)
- 12’-0” Headlog Height
- (2) 24” wide x 24” deep Towknees
- Deck Capacity 2500 PSF.
- Barge Weight 370.84 Short Tons
Voids
- Rake
- Stern
- 8 Mid-Body
- Upper and Lower Rub Bars 6” x 3/4″
Deck Fittings
- 10” Double Bitt (4)
- 8” x 16” Open Chock (4)
- 36” Cast Steel Kevels (5) Rake, Stern, and coaming side
- ”D”-Rings (2)
- 18” flush water tight Hatch (10)
- 18” x 24” RWT Hatch in void bulkheads (10)
- No winches
Scantlings
- ¾” stern corners, stern log, bow head log, and bow corner wraps
- 3/4” Midbody deck
- 1/2” Coaming
- 3/8” Conical Coaming Brackets
- 3/8” Sides
- 5/8” Side Bilge and Rake Knuckle
- 3/8” Mid-Body Bottom
- 3/8” Rake Bottom
- 3/8” Stern Bottom
- 3/4″ Rake Headlog
- 3/4” Sternlog
- 3/4″ Stern Bilge
- 1/2″ Transom Plate
- 6” I-Beam @12.5#
- 5/16” Void Bulkheads
- 4” x 3” x 5/16” Bottom Longitudinals
- 4” x 3” x 5/16” Side Longitudinal Angles
- 4” x 3” x 5/16” Vertical Bulkhead
- 4” x 4” x 5/16” Truss Diagonals
- 6” x 6” x 3/8” Transverse Truss Stantions
- C10” x 25 Top Transverse Chord
- C7” x 9.8 Lower Transverse Chord
- C8” 11.5 Outboard Vertical Truss Chord
Coatings
- All Steel (Plate and Structural) Wheelabrated SSPC-SP-10
- Pre-Construction Zinc Primer 0.50 to 0.75 MILS
- Interior Voids – Full Void Coat at 5.0 – 6.0 MILS – SeaGuard 1050 standard
- Exterior – 1 coat Epoxy 6.0 to 8.0 MILS – SeaGuard 6000 Haze Gray standard
- Non-skid on walking decks – Black Beauty standard
- Cargo Area – None
- 6” Safety Stripe around perimeter painted yellow – standard
- Manhole and Deck Fittings painted white – standard
- Barge Name – 9 places