B-158
Open Hopper Aggregate Barge
200’ X 35’ X 13’ w/ 3’ COAMING
Drawing: Top View
Drawing: Profile View
B-158
FLYER
PDF contains this information plus draft tables. For questions regarding any barge listed - please contact Andrew Holthaus or Paul Peoples.
B-158
Specifications
Description
- 200’ X 35’ X 13’
- 3’-0” Coaming
- 15’-0” Headlog Height
- Two (2) 26” wide x 36” deep Towknees
Voids
- Rake
- Stern
- 5 Mid-Body
- Upper and Lower Rub Bars -6” x 3 4″
Deck Fittings
- 48” Cast Steel Kevels at corners (4)
- 36” Cast Steel Kevels (8)
- ”D”-Rings (4)
- 8” Button Chock (4)
- 15” x 23” 4-Dog R.W.T. Hatch (12)
- Stationary Dixie 24” Barrel Ratchet with forged pelican hook and forged 2” Eye bolt (4)
Scantlings
- ¾” Stern Corners, Stern Log, Bow Head Log, and Bow Corner Wraps
- ⁵/8” Innerbottom
- ⁵/8” Slope Sheet
- 1/2” Cargo Wall
- 3/8” Gunwale
- 3/8” Sides
- ⁵/8” Bilge Knuckle
- 3/8” Mid-Body Bottom
- 3/8” Rake Bottom
- ⁵/8” Stern Bottom
- 6” x 6” x 1/2” Boundry Angle
Coatings
- All Steel (Plate and Structural) Wheelabrated SSPC-SP-10
- Pre-Construction Zinc Primer 0.50 to 0.75 MILS
- Stripe Coat bottom welds in Mid-Body and Stern
- Interior Voids – Lower 24” with Void Coat at 4.0 to 6.0 MILS – SeaGuard 1050 standard
- Exterior – 1 coat Epoxy 6.0 to 8.0 MILS – SeaGuard 6000 Haze Gray standard
- Non-skid on walking decks and hatch lids– Black Beauty standard
- Cargo Area – None
- 6” Safety Stripe around perimeter painted yellow – standard
- Manhole and Deck fittings painted white – standard
- Barge Name – 6 places – cut from plate steel
